The Corner shower cabin from Wiesbaden is the ideal solution for the smaller bathrooms where accessories are mounted close together.
For example, when a wall closet is placed directly next to the shower cabin. The double-door design of the Corner shower cabin makes the doors less far in the bathroom. Please note that the doors of this Corner shower cabin can only be opened to the outside. This shower cabin is supplied with two 45 degree stabilization bars and two wall profiles.
The hinges of the Corner shower cabin have a lifting effect, so that the doors can also be opened with a slope in the floor. In addition, the lift function ensures that the drain profiles at the underside of the doors rub less over the ground and therefore wear less quickly.
The Corner shower cabin is made of hardened safety glass and finished with NANO coating.
Tempered safety glass:
All our walk-in showers are standard made of hardened safety glass. Safety glass, as the name implies, is safer than standard glass. In the event of breakage of normal glass, the glass plate will disintegrate into large pieces. In the case of safety glass, the glass is made in such a way that it disintegrates into thousands of small pieces when broken. As a result, the risk of serious injury is many times smaller. This is of course a big plus, especially at installation, where most breakages occur.
On a microscopic level the world looks very different. In the case of glass, it can be seen that a glass product has many small open pores. Dirt and lime can quickly adhere through these pores. By applying NANO coating (machine) rollers, these pores are 'greased' and dirt and lime adhere much less quickly to the glass surface.
And that means little maintenance and less cleaning with the wiper, hurray!
All shower cabins are 2000mm high and 8mm thick. Two 45 degree stabilization bars and two wall profiles are included.
These are our available width sizes:
- Sliding doors are also available in 900mmx900mm.
Please consult the manual before placing this product.