The Single shower cabins are by far the most sold shower cabins on the European market.
Easy to place on the floor or on a shower tray and by using as few profiles as possible, the shower room remains very light. The cabin is reversible and can therefore be placed in the corner on the left or right. This Single shower cabin comes with a 45 degree stabilization bar and two wall profiles.
The hinge of the Single shower cabin has a lifting effect so that the door can also be opened with a slope in the floor. In addition, the lift function ensures that the drainage profile on the underside of the door, rubs less over the ground and therefore does not wear as quickly.
The Single shower cabin from Wiesbaden comes with a 45 degree stabilization bar, is made of hardened safety glass and finished with NANO coating.
Tempered safety glass:
All our walk-in showers are standard made of hardened safety glass. Safety glass, as the name implies, is safer than standard glass. In the event of breakage of normal glass, the glass plate will disintegrate into large pieces. In the case of safety glass, the glass is made in such a way that it disintegrates into thousands of small pieces when broken. As a result, the risk of serious injury is many times smaller. This is of course a big plus, especially at installation, where most breakages occur.
On a microscopic level the world looks very different. In the case of glass, it can be seen that a glass product has many small open pores. Dirt and lime can quickly adhere through these pores. By applying NANO coating (machine) rollers, these pores are 'greased' and dirt and lime adhere much less quickly to the glass surface.
And that means little maintenance and less cleaning with the wiper, hurray!
All walk-in showers are 2000mm high and 8mm thick. 45 degree stabilization bar and two wall profiles are included.
These are our available width sizes:
- 900mmx900mm (only on order)
Please consult the manual before placing this product.